Product PDF's
Get the system you need.
Audio and visual nurse call systems for assisted living facilities, nursing homes, hospitals and outpatient medical clinics.
Traditional lights, buttons and pull cords are smartphone/WiFi integrated. Let us know what you’re trying to do and we’ll take care of you.
Order by Noon CST for possible same day shipping*
*See Terms & Conditions
1-800-558-8957
Keypad, Zone Control with Arm/Disarm and Exit Time Delay on Two Gang Plate
Door Security Zone Control Keypad with Arm and Disarm Capability
The 1806D Zone Control Keypad from Cornell Communications features a red, green and amber light notification system, so there is never confusion over the door’s arming status. The keypad allows for door arming and disarming without returning to the main door monitoring system unit. A 1 to 6 digit code is the only requirement to arm, disarm or engage an exit time delay. Programming is accomplished at the zone control keypad itself and power failure will not erase any programmed data. This double gang, stainless steel zone control unit fits in a standard double-wide electrical box.
Integrating with current mobile technology, our nurse call solutions are flexible enough to fit your healthcare facility’s needs. Whether you want to expand your existing nurse call system or are looking to replace it completely, Cornell Communications has the nurse call system to meet your requirements.
Related Parts:
| Part A-1808D |
Description:
Cornell's remote zone keypad stations allow for access code entry to restricted areas. The stations include:
* Quick change access codes that are user programmable via the keypad.
* Allows for remote arm, disarm, and exit delay functions.
* An optional tone device.
Operation:
(Arm, Disarm, and Exit Delay) Enter the 1 to 6-digit access code. The yellow LED will flash 3 times. Press the * key to disarm the zone, the # key to arm the zone, or the 0 key to initiate time delay.
Mounting:
The satin finish stainless steel face plate with silk-screened designations may be flush mounted on a standard outlet box with dual-gang plaster.
Specifications:
The contractor shall furnish and install a CORNELL remote zone keypad. The face plate shall be a standard two-gang stainless steel plate. The keypad shall be micro-controller based. The micro-controller shall have built-in watchdog timer. LED indicators (red, green, yellow) shall be utilized for long life; incandescent lamps are not acceptable. Unit shall be user programmable entirely from the keypad. Unit shall accept any 1 - 6 digit access code. Programming shall be preserved during power failure. Unit shall be operated on 12 VDC. Power consumption shall be less than 20mA.
Technical Info:
- Power requirements: 12VDC
- Operating environment: 50-120 degrees Fahrenheit, non-condensing
- Mounting surface: Flush or Desktop
- Wiring: #22 AWG Minimum
Shop door security systems from Cornell Communications to improve security in your healthcare facility!
Get Help with System Design/Installation